Cold Shrink Tubing Parts and Components – Complete Online Database

3m Motor Lead Splicing Kits 5300 Series Are A Series Of Kits Designed For Splicing Motor Lead Cables To Incoming Feeder Cables, Including The Accommodation Of Pigtails (Stub) Connections At 1000 Volts And Less. The Splice's Main Component, The Lug Cover, Is Made From Epdm Rubber As A Slip-On. A Mastic Is Used For The Moisture Seal. These Kits Are Designed To Be Used With Copper Compression, One-Hole Lugs. After Being Crimped Onto The Cables, The Lugs Are Bolted Together In A Pigtail Configuration, The Insulated And Sealed With The 3m Motor Lead Splicing Kit. Each Kit Makes Three Splices And Contain All The Necessary Materials (Except Lugs) Needed To Make Three Splices. The Lugs Must Be Purchased Separately. Scotchlok 30,000 Series Copper Compression Lugs, Or Other Ul Listed Copper Lugs, Can Be Used.

These Kits Are Designed To Be Used With Copper Compression, One- Or Two-Hole Lugs. After Being Crimped Onto The Cables, The Lugs Are Bolted Together In An Inline Configuration, Then Insulated And Sealed With The 3m™ Motor Lead Splicing Kit. Each Kit Contains All The Necessary Materials (Except Lugs) Needed To Make Three Splices. The Lugs Must Be Purchased Separately. 3m™ Scotchlok 30000 Series Copper Compression Lugs, Or Other Ul Listed Copper Lugs, Can Be Used.

This Kit Includes: 1 Molded Sheath Seal Body And 1 Set Of Instructions.

The Shield Adapter Kit Design Provides A Fault Current Capacity Of 600 Amps On 15-35 Kv Class Cables. These Cold Shrink Kits Require No Heat, Special Tools Or Special Skills To Install. The Cold Shrink Kits Come Complete With All Necessary Components (Except The Cable Accessory) And Are Installed In A Few Simple Steps. We'Ve Even Attached A "bleeder Wire" To The Ground Strap Eliminating The Need For Additional Wire And Connectors. Each Kit Contains Enough Material To Ground One Cable Accessory.

3m™ Cold Shrink Tubes Are Designed Using A Unique Cold Shrink Delivery System. Products Are Supplied Prestretched On A Removable Core For Efficiency And Ease Of Installation. Removal Of The Core (Unwind) After Positioning Allows The Product To Shrink Into Position Forming A Moisture-Tight Seal. The Live Memory Action Of The Specially Formulated Material Ensures A Permanent, Durable Environmental Seal And Insulation.

3m™ Cold Shrink Tubes Are Designed Using A Unique Cold Shrink Delivery System. Products Are Supplied Prestretched On A Removable Core For Efficiency And Ease Of Installation. Removal Of The Core (Unwind) After Positioning Allows The Product To Shrink Into Position Forming A Moisture-Tight Seal. The Live Memory Action Of The Specially Formulated Material Ensures A Permanent, Durable Environmental Seal And Insulation.

3m™ Cold Shrink Tubes Are Designed Using A Unique Cold Shrink Delivery System. Products Are Supplied Prestretched On A Removable Core For Efficiency And Ease Of Installation. Removal Of The Core (Unwind) After Positioning Allows The Product To Shrink Into Position Forming A Moisture-Tight Seal. The Live Memory Action Of The Specially Formulated Material Ensures A Permanent, Durable Environmental Seal And Insulation.

3m™ Cold Shrink Tubes Are Designed Using A Unique Cold Shrink Delivery System. Products Are Supplied Prestretched On A Removable Core For Efficiency And Ease Of Installation. Removal Of The Core (Unwind) After Positioning Allows The Product To Shrink Into Position Forming A Moisture-Tight Seal. The Live Memory Action Of The Specially Formulated Material Ensures A Permanent, Durable Environmental Seal And Insulation.

This Cold Shrink Jacket Kit Offers Advanced, One-Piece, Water-Tight Rejacketing For Jcn Cable Splices. Designed As An Accessory Kit To Rejacket Over Molded Rubber Splices, The Sj Series Is Made From A Durable Epdm Rubber.

These Kits Are For Splicing 5 Kv And 8 Kv Shielded, Solid Dielectric, Power Cables.

These Kits Are Designed To Be Used With Copper Compression, One- Or Two-Hole Lugs. After Being Crimped Onto The Cables, The Lugs Are Bolted Together In A Pigtail Configuration, Then Insulated And Sealed With The 3m™ Motor Lead Splicing Kit. Each Kit Contains All The Necessary Materials (Except Lugs) Needed To Make Three Splices. The Lugs Must Be Purchased Separately. 3m™ Scotchlok 30000 Series Copper Compression Lugs, Or Other Ul Listed Copper Lugs, Can Be Used.

3m™ Cold Shrink Tubes Are Designed Using A Unique Cold Shrink Delivery System. Products Are Supplied Prestretched On A Removable Core For Efficiency And Ease Of Installation. Removal Of The Core (Unwind) After Positioning Allows The Product To Shrink Into Position Forming A Moisture-Tight Seal. The Live Memory Action Of The Specially Formulated Material Ensures A Permanent, Durable Environmental Seal And Insulation.

3m™ Splice Kits 8420 Series Are Designed Using The Unique Cold Shrink Delivery System Developed By 3m™. Products Are Supplied Pre-Stretched On A Removable Core For Efficiency And Ease Of Installation.

3m™ Cold Shrink Tubes Are Designed Using A Unique Cold Shrink Delivery System. Products Are Supplied Prestretched On A Removable Core For Efficiency And Ease Of Installation. Removal Of The Core (Unwind) After Positioning Allows The Product To Shrink I

This Corrosion Protection Kit Is Designed To Provide A Quick And Easy Method For Protecting Bulkhead Termination Connectors From The Corrosive Influences Of Wet And Salt-Fog Installation Environments. 10 Per Case.

These Kits Are Designed To Be Used With Copper Compression Lugs. After Being Crimped Onto The Cables, The Lugs Are Bolted Together, Then Insulated And Sealed With The 3m™ Motor Lead Splicing Kits. Each Kit Contains All The Necessary Materials (Except Lugs) Needed To Make Three Splices. The Lugs Must Be Purchased Separately. 3m™ Scotchlock Copper Compression Lugs 30000 Series, Or Other Ul Listed Copper Lugs, Can Be Used.

The 3m™ Cold Shrink Low Voltage Qslv-M Provides Quick, Reliable Insulation And Protection For Secondary Low-Voltage Splices. The 8-2/0 Tube Fits 8 Awg To 2/0 Awg And Is Designed As Primary Electrical Insulation For Solid Dielectric Insulated Wire And Cable Splices Rated To 1,000 Volts. Mastic Rings At Each End Provide Remarkably Wide Wire Range. In Fact, The Two Qslv-M Tubes Together Offer 3 Times The Wire Range On Traditional Cold Applied Products. After Installation, A Solid Internal Core Remains Inside To Protect Against Impact Damage. Installation Is Easy With No Torch Or Tools Required. It Provides Reliable Sealing And Long-Term Durability. , Even After Years Of Aging And Exposure. Qslv-M Tubes Are Designed To Resist Fungus, Acids And Alkalies, And Have Passed Testing For Ansi C119.1. It Can Be Used For Direct Bury Or Submersible Applications On Either Aluminum Or Copper Splices.

Cold Shrink Connector Insulator

Cold Shrink Connector Insulators

3m™ Cold Shrink Insulator 8426-9m, 2-4/0 Awg (30-90 Mm²), 10/Case

3m™ Cold Shrink Insulator 8426-9p 2/0 Awg-250 Kcmil (70-125 Mm²)

Cold Shrink Connector Insulators

Cold Shrink Connector Insulators

3m™ Cold Shrink Silicone Insulator 8443-2,Tape, Wire, Unishield, 0 - 600

3m™ Cold Shrink Silicone Insulator 8443-6.5 Tape Wire Unishield