Request a Quote for Part No TP-102-01-T Under Test And Measurement by Components Corp on Expansive Electromechanicals

Mfg Part Number : TP-102-01-T

Manufacturer : Components Corp

Main Category : Test And Measurement

Category : Test Equipment

Sub Category : Through Hole Mount Test Points

Description : The Tp-102 Series Of Printed Circuit Mounted, Test Point Jumpers Provides A Significantly Lower Cost And Superior Function To That Of Conventional "turret" Type Terminals In Board Level, "trouble Shooting" Applications. With Only Two Part Number Types, The Tp-102 Series Covers The Complete Range Of Hole Diameters Most Commonly Employed For "turret" Terminals; The Need For Costly Re-Design Of Circuit Board Art Work Is Eliminated. Spring Tempered, Flared Leads Allow Sufficient Tension Positioning In The Hole During Wave Soldering, Thereby Eliminating The Costly Staking Or Secondary Soldering Operations Normally Encountered With "turret" Terminals. The Unique Loop Profile Of The Tp-102 Series Offers A Superior And Positive Anchor For Commonly Used, Spring Loaded Test Probes And Clips. The Economies And Single Hole Mounting Requirement Of This Design Permit Greater Numbers Of Test Point Locations In P.C. Board Applications At Much Less Expense Than Previously Used "turret" Terminals. The Tp-102 Series Devices Are Formed From Phosphor Bronze Alloy Wire. Due To The Spring Temper And Flared Lead Design, Only Two Styles Are Necessary To Cover Mounting Hole Diameters From .067" To .078" And .112" To .116".

Thank you for exploring our inventory of items here on Expansive Electromechanicals. You have taken an interest in part number TP-102-01-T by Components Corp, listed with the description “The Tp-102 Series Of Printed Circuit Mounted, Test Point Jumpers Provides A Significantly Lower Cost And Superior Function To That Of Conventional "turret" Type Terminals In Board Level, "trouble Shooting" Applications. With Only Two Part Number Types, The Tp-102 Series Covers The Complete Range Of Hole Diameters Most Commonly Employed For "turret" Terminals; The Need For Costly Re-Design Of Circuit Board Art Work Is Eliminated. Spring Tempered, Flared Leads Allow Sufficient Tension Positioning In The Hole During Wave Soldering, Thereby Eliminating The Costly Staking Or Secondary Soldering Operations Normally Encountered With "turret" Terminals. The Unique Loop Profile Of The Tp-102 Series Offers A Superior And Positive Anchor For Commonly Used, Spring Loaded Test Probes And Clips. The Economies And Single Hole Mounting Requirement Of This Design Permit Greater Numbers Of Test Point Locations In P.C. Board Applications At Much Less Expense Than Previously Used "turret" Terminals. The Tp-102 Series Devices Are Formed From Phosphor Bronze Alloy Wire. Due To The Spring Temper And Flared Lead Design, Only Two Styles Are Necessary To Cover Mounting Hole Diameters From .067" To .078" And .112" To .116".” If you wish to receive a quote for this component, we encourage you to fill out the RFQ form provided on this page with as much information as possible, including your target budget, expected shipping time frame, and other relevant details. Our representatives are on standby 24/7x365 to supply customers with sourcing solutions on items like part number TP-102-01-T and other similar electromechanical parts our customers require to keep operations running smoothly.

Note : We Will Not Share Your Information With Any Third Parties.

Product Details

“*” Required Fields are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

For Test Equipment products manufactured by leading entities like Components Corp, and others, you can trust us to be your dependable procurement partner. We proudly operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation, a testament to our commitment to quality assurance practices. For example, we abide by a strict NO CHINA SOURCING pledge, which means that all The Tp-102 Series Of Printed Circuit Mounted, Test Point Jumpers Provides A Significantly Lower Cost And Superior Function To That Of Conventional "turret" Type Terminals In Board Level, "trouble Shooting" Applications. With Only Two Part Number Types, The Tp-102 Series Covers The Complete Range Of Hole Diameters Most Commonly Employed For "turret" Terminals; The Need For Costly Re-Design Of Circuit Board Art Work Is Eliminated. Spring Tempered, Flared Leads Allow Sufficient Tension Positioning In The Hole During Wave Soldering, Thereby Eliminating The Costly Staking Or Secondary Soldering Operations Normally Encountered With "turret" Terminals. The Unique Loop Profile Of The Tp-102 Series Offers A Superior And Positive Anchor For Commonly Used, Spring Loaded Test Probes And Clips. The Economies And Single Hole Mounting Requirement Of This Design Permit Greater Numbers Of Test Point Locations In P.C. Board Applications At Much Less Expense Than Previously Used "turret" Terminals. The Tp-102 Series Devices Are Formed From Phosphor Bronze Alloy Wire. Due To The Spring Temper And Flared Lead Design, Only Two Styles Are Necessary To Cover Mounting Hole Diameters From .067" To .078" And .112" To .116". parts are delivered alongside all applicable manufacturer trace documentation and qualifying certifications. Additionally, a large portion of items undergo various levels of testing and visual inspections to ensure fit, form, and function. Knowing all this, do not hesitate to request a quote for part number TP-102-01-T today, and experience our competitive prices and shipping for yourself.

Related Electromechanical Components of TP-102-01-T

TP-002
Connectors
Other

TP-10-453-2
Concord

TP-10015
Honeywell

TP-100AU
Connectors
Other

TP-101
Connectors
Other

TP-101-01-04
Components Corp

TP-101-01-09
Components Corp

TP-101-10
Through Hole Mount Test Points
Components Corp

TP-101-10-T
Through Hole Mount Test Points
Components Corp

A Complete Electromechanical Parts Purchasing Platform

AS9120B and ISO 9001:2015
Aviation Suppliers Association Member
FAA AC 0056B Accredited
AS 6081:2012 Certification
ESD S20.20-2014 Certification

	Guaranteed on-time delivery
	Over 5100 manufacturers
	Customized and user-friendly database
	Competitive Prices
	Scheduling Flexibility
	Complete purchasing solutions